head_banner

News

The socket type buckle type steel pipe scaffolding is a new type of steel pipe scaffolding with self-locking project, compared with the traditional fastener type overhanging scaffolding, there is a significant improvement in erection and dismantling efficiency, reliability, cost saving and energy saving and environmental protection.

However, the construction of socket-type plate buckle steel pipe scaffolding also has its own testing standards, today we will learn more.

First, the inspection and evaluation of the socket type steel pipe scaffolding should be in line with the current industry standard “construction socket type steel pipe scaffolding * technical specifications” JGJ231 provisions.

Second, the inspection and evaluation of socket type steel pipe scaffolding guarantee projects include: construction program, frame foundation, frame stability, bar settings, scaffolding, delivery and acceptance.

General items include: frame protection, rod connection, component material, access.

The erection height of the socket type buckle type steel pipe scaffolding should not be greater than 24m.

Third, the inspection and evaluation of the socket type steel pipe scaffolding guarantee project should comply with the following provisions.

 

(A), construction program

Scaffolding erection should be prepared for special construction plans, structural design should be calculated; special construction plans should be reviewed and approved in accordance with the provisions.

Draw the overall layout of the shelf structure plan, elevation, section drawing

n3

(II), the foundation of the vertical pole

The foundation of the uprights shall be leveled and compacted according to the requirements of the program, and drainage measures shall be taken.

Soil foundation on the bottom of the uprights set pad and adjustable base, and should meet the requirements of the specification.

The longitudinal and transverse sweeping rods of the frame shall be set in accordance with the specification requirements.

The bottom of the pole should be set adjustable base, can also be set in the bottom of the pole pad plate, the length of the pad plate should not be less than 2 span.


Post time: Sep-23-2021